Joey's New Bedsheets

I have finally finished that poor boy's sheets. He's had the same 2 sets of bedsheets for over 3 years, but no more! I thought, "Hey, how hard could it possibly be to make a sheet. It's a flat piece of fabric with some corners in it." It turns out, it wasn't that hard, it was just kind of a pain in the butt. The great part about the process, though, was that I got to take Joey to the store with me so he could pick out whatever pattern he wanted. We both had a good time with this part.

The first set of sheets I made was made from some Cars fabric Joey picked out. If you missed it the first time, the pillowcase pattern can be found elsewhere on my blog HERE. Super easy stuff, and it took me about 20 minutes to make.

The second set of sheets we made (I say we because he's a very good helper and would want credit, I'm sure), was made from some dump truck fabric he picked. Now, I couldn't stand to make an entire bedsheet out of the super busy dump truck pattern so I made the pillowcase using the dump truck fabric and picked out a coordinating fabric for the actual bedsheet. You'll see what I mean in a second. I made this pillowcase the exact same way with the exception of the added grosgrain ribbon embellishment. I took that out and used some decorative stitching on the outer hem to have a little fun with my new sewing machine. :)

You can't see it very well in this picture, but the bedsheet is a fabric with all sizes of grey circles. I thought it looked like rocks all piled up, and it goes really well with his pillowcase. And also, he's a hammy turkey. :)

So, now to get down to business! The pattern I used for the bedsheet can be found HERE. The guys at Michael Miller Fabrics did an amazing job with this pattern as it was very easy to read and complete. I did, however, need to make some changes to suit my own needs. For Joey's bedsheet (please be sure to measure your mattress!), I had to add 2" to the length. On the other hand of that, the pattern calls for 45" in fabric width, and I did just fine with 42". I couldn't find anything at JoAnn's that had 45" length.

I also decided to use 3/8" elastic as the 1/4" they suggest looked way to flimsy when I went to buy it in the store. I wanted a little extra strength assurance. That also changed the hemming measurements: I folded the hem over a full 1" and then folded back under 1/4" (same in the pattern) in order to fit the wider elastic. It is always suggested that you leave 1/4" on each side of your elastic track. So if your elastic is 3/8" wide, you need a track that is 7/8" wide. I was short about an 1/8", but with my bodkin and my super-savvy threading skills, it worked just fine.

I always encourage you to make your decor your own, and this is a really easy way to do it. Don't let it intimidate you! I do get a little overwhelmed by my crafts sometimes, but, if I just sit down and do it, everything works out just fine. And if it doesn't, you can always give it as a gift. ;) I'm looking forward to getting to make Rosie's sheets when hers start to get old. :) Happy Crafting!

Easy Toddler Pillowcase

I welcome you to Joey's first pillowcase tutorial! We figured he was old enough to have his own pillow, and I wanted to encourage him to welcome the change (he's NOT good with change) by having him pick his own pillow fabric. Fun, right?

Easy Toddler Pillowcase (14" x 20" pillow insert)

*Fabric of your choice (I bought 1 yard, but you could get away with 1/2 provided you'll be doing a cuff also)
*ribbon or extra fabric for embellishment
*coordinating fabric for the cuff
*coordinating thread

Seam allowances: 1/2" unless otherwise stated.

1.  Prewash and iron the fabric. This will make it easier to work with.

2.  Cut the fabric. This is ALWAYS my least favorite part...

• Case: 32" x 15-1/2" (you'll be folding this in half to cover the pillow)
• Cuff: (2) 15-1/2" x 7"
• embellishment: (2) 15-1/2" x 7" (I used 3/4" grosgrain ribbon)

3.  Baste the embellishment onto the right side of the cuff fabric as close to the edge of the embellishment as possible. It depends on how much embellishment you want showing, but I moved mine in 1/4" so I had 1/2" of ribbon showing on the pillowcase.

4.  Then, I folded in and ironed my 1/2" hem on the short side of the case fabric and pinned the cuff fabric right underneath it but only as far in as the 1/2" seam. Sew as close to the edge of the case fabric as you can get. Then, I sewed a second seam 1/4" away from that one.

• So you see, I have the case fabric on top (right side up) with the cuff fabric (also right side up) and basted ribbon underneath at the 1/2" seam line.

5.  Fold assembly in half with right sides together. You can take a look and make sure your embellishments line up, if you like. I took a peek, but I didn't really care all that much. :) Sew your 1/2" seam on both long sides.

6.  Now you can turn it right side out and press all your seams.

• It looks really nice when you fold the fabric in half instead of sewing those 3 sides.

7.  Measure 1" all around the cuff and fold/pin/press the fabric in at this point.

8.  You can use whatever color thread you like, but I chose a contrasting red color to bring in more of  the color of the case fabric. Sew at 5/8" and then again at 7/8" for a nice look. 

9.  Press one more time, admire your work and you're done! 

• The contrasting color thread on the black cuff looks really neat!

After I finally figured out all my dimensions, it only took me about an hour to put this together. Now that I have my instructions, the next one will be even quicker. Will I be moving on to sheets? I have NO idea. We'll have to see how brave I get. :)

For now, we'll be building Cars-themed fluffy pillow forts and sleeping comfortably.