Joey's New Bedsheets

I have finally finished that poor boy's sheets. He's had the same 2 sets of bedsheets for over 3 years, but no more! I thought, "Hey, how hard could it possibly be to make a sheet. It's a flat piece of fabric with some corners in it." It turns out, it wasn't that hard, it was just kind of a pain in the butt. The great part about the process, though, was that I got to take Joey to the store with me so he could pick out whatever pattern he wanted. We both had a good time with this part.

The first set of sheets I made was made from some Cars fabric Joey picked out. If you missed it the first time, the pillowcase pattern can be found elsewhere on my blog HERE. Super easy stuff, and it took me about 20 minutes to make.

The second set of sheets we made (I say we because he's a very good helper and would want credit, I'm sure), was made from some dump truck fabric he picked. Now, I couldn't stand to make an entire bedsheet out of the super busy dump truck pattern so I made the pillowcase using the dump truck fabric and picked out a coordinating fabric for the actual bedsheet. You'll see what I mean in a second. I made this pillowcase the exact same way with the exception of the added grosgrain ribbon embellishment. I took that out and used some decorative stitching on the outer hem to have a little fun with my new sewing machine. :)

You can't see it very well in this picture, but the bedsheet is a fabric with all sizes of grey circles. I thought it looked like rocks all piled up, and it goes really well with his pillowcase. And also, he's a hammy turkey. :)

So, now to get down to business! The pattern I used for the bedsheet can be found HERE. The guys at Michael Miller Fabrics did an amazing job with this pattern as it was very easy to read and complete. I did, however, need to make some changes to suit my own needs. For Joey's bedsheet (please be sure to measure your mattress!), I had to add 2" to the length. On the other hand of that, the pattern calls for 45" in fabric width, and I did just fine with 42". I couldn't find anything at JoAnn's that had 45" length.

I also decided to use 3/8" elastic as the 1/4" they suggest looked way to flimsy when I went to buy it in the store. I wanted a little extra strength assurance. That also changed the hemming measurements: I folded the hem over a full 1" and then folded back under 1/4" (same in the pattern) in order to fit the wider elastic. It is always suggested that you leave 1/4" on each side of your elastic track. So if your elastic is 3/8" wide, you need a track that is 7/8" wide. I was short about an 1/8", but with my bodkin and my super-savvy threading skills, it worked just fine.

I always encourage you to make your decor your own, and this is a really easy way to do it. Don't let it intimidate you! I do get a little overwhelmed by my crafts sometimes, but, if I just sit down and do it, everything works out just fine. And if it doesn't, you can always give it as a gift. ;) I'm looking forward to getting to make Rosie's sheets when hers start to get old. :) Happy Crafting!

Easy Toddler Pillowcase

I welcome you to Joey's first pillowcase tutorial! We figured he was old enough to have his own pillow, and I wanted to encourage him to welcome the change (he's NOT good with change) by having him pick his own pillow fabric. Fun, right?

Easy Toddler Pillowcase (14" x 20" pillow insert)

*Fabric of your choice (I bought 1 yard, but you could get away with 1/2 provided you'll be doing a cuff also)
*ribbon or extra fabric for embellishment
*coordinating fabric for the cuff
*coordinating thread

Seam allowances: 1/2" unless otherwise stated.

1.  Prewash and iron the fabric. This will make it easier to work with.

2.  Cut the fabric. This is ALWAYS my least favorite part...

• Case: 32" x 15-1/2" (you'll be folding this in half to cover the pillow)
• Cuff: (2) 15-1/2" x 7"
• embellishment: (2) 15-1/2" x 7" (I used 3/4" grosgrain ribbon)

3.  Baste the embellishment onto the right side of the cuff fabric as close to the edge of the embellishment as possible. It depends on how much embellishment you want showing, but I moved mine in 1/4" so I had 1/2" of ribbon showing on the pillowcase.

4.  Then, I folded in and ironed my 1/2" hem on the short side of the case fabric and pinned the cuff fabric right underneath it but only as far in as the 1/2" seam. Sew as close to the edge of the case fabric as you can get. Then, I sewed a second seam 1/4" away from that one.

• So you see, I have the case fabric on top (right side up) with the cuff fabric (also right side up) and basted ribbon underneath at the 1/2" seam line.

5.  Fold assembly in half with right sides together. You can take a look and make sure your embellishments line up, if you like. I took a peek, but I didn't really care all that much. :) Sew your 1/2" seam on both long sides.

6.  Now you can turn it right side out and press all your seams.

• It looks really nice when you fold the fabric in half instead of sewing those 3 sides.

7.  Measure 1" all around the cuff and fold/pin/press the fabric in at this point.

8.  You can use whatever color thread you like, but I chose a contrasting red color to bring in more of  the color of the case fabric. Sew at 5/8" and then again at 7/8" for a nice look. 

9.  Press one more time, admire your work and you're done! 

• The contrasting color thread on the black cuff looks really neat!

After I finally figured out all my dimensions, it only took me about an hour to put this together. Now that I have my instructions, the next one will be even quicker. Will I be moving on to sheets? I have NO idea. We'll have to see how brave I get. :)

For now, we'll be building Cars-themed fluffy pillow forts and sleeping comfortably. 

The Perfect Pillow

In the recent very long search to find the perfect back support pillow for Baby 2.0's new green glider, of course, we found nothing we liked. I'm sure you've noticed this happens a lot. I did, however, find the perfect fabric at Hancock Fabrics. So I went for it! This is probably one of the easiest projects you will ever take on if you ever need a nice decorative (or fully functional) pillow for a certain space.

It goes along with our color scheme perfectly (grey, blue, lime green and pink), and we were able to get just the right size pillow form. So I did get the pillow form, I got a yard of this gorgeous fabric (in case I wanted to make other things with it), some 7/8" wide black satin ribbon and a couple buttons for the envelope closure at the back of the pillow. Easy peasy.

I cut the fabric to fit the form so the finished size was exactly the size of the pillow, in this case 12" x 16". The hardest part was definitely working that satin ribbon around the edges. I wanted something to break up the front and the back of the pillow, but I have never done piping or anything like that. I took the cheater's way out, and I folded the satin ribbon in half and sewed it right to the pillow cover. It was a bit tricky, but I LOVE the way it turned out.

Adding the buttonholes, and consequently the buttons, was the finishing touch on this lovely addition to the nursery. I chose some giant buttons so they were more of the design of the pillow as opposed to just being functional. They look good, too. :)

And voila! You have a beautiful personalized back support (or decorative, if that's your thing) pillow that you have created yourself. Not to mention it took all of a couple hours to finish this project. I love quick projects! Happy Crafting!

DIY: Trendy Baby Decor

I'm going to apologize for this "tutorial" right now. Yes, I'm implying it's not really a tutorial. It's more like half of one. I wasn't entirely sure this was going to work out when I started it, but, as it turns out, I really liked the end result.

I think we've all seen those beautiful chandelier butterfly mobiles that are pretty popular right now. They're all over etsy, pottery barn has one and you can find them on amazon. The only problem with these is 1) they're usually between $50 and $80 and 2) butterflies are really your only decorative option. Enter... the brain trust...

Trendy Chandelier Mobiles: a la Rayna

Supplies:
colored papers for die cutting
die cutting method (cricut, punch, freestyle with scissors, etc.)
ruler
metal ring (I used 10" diameter)
.5mm stretch magic beading string
18 gauge wire
wire cutters / curlers
coordinating ribbon for wrapping exposed metal wire and ring
* I used 1/4" for the smaller inside wire
* I used 3/8" for the larger outer ring
scissors
various adhesives
*I used glue dots for adhere birds to stretch string
*I used scotch tape to wrap loose ends of stretch string around exposed wire and ring
*I used Aleene's Jewelry & Metal Glue for adhering wire to ring and ribbon to wire / ring
various clamps for holding wrapped ribbon when your hands start to cramp

I first had to strategize how I was going to lay out my mobile. This probably took the longest amount of time for me as it was a LOT of trial and error. I designed it as an outer metal ring with a 4-point inner crossbar. In the end, I ended up with these specs where the red dots represent where I tied each chandelier string:

• 1 middle string: 24" long
• 4 strings radiating out at 21" long
• 4 strings radiating out at 15" long
• 16 strings along outer ring at 12" long

With the spacing I chose and the die cut sizes (birds: 2", clouds: 2-1/2"), the individual string specs worked out like this:

• 24" string: 6 die cuts (2 clouds, 4 birds)
• 21" strings: 4 die cuts (1 cloud, 3 birds)
• 15" strings: 3 die cuts (1 cloud, 2 birds)
• 12" strings: 2 die cut birds 

Phew. Now that that's over... 

1.) I first made my inner crossbar with the 18 gauge wire and adhering it to itself with  the jewelry and metal glue. Be careful with this stuff. I almost bonded my fingers together about a million times. But it works some serious magic with the wire and the ribbon. I wrapped the outer ends of the crossbar around the outer ring with the wire curlers and also used the glue to adhere these 4 points in place.

2.) Using the specs listed above, I then attached all the die cuts to the chandelier strings and then attached the chandelier strings to the crossbar and outer ring with the stretch beading string.

3.) I used the scotch tape to wrap all the stretch beading string loose ends from the chandelier strings around the inner crossbar wires and outer ring.

4.) After all the loose ends are taken care of, wrap the inner crossbar wire with the thinner wire. I fastened the ends of the ribbon to the wire with the jewelry & metal glue. Pure magic. Just don't glue your fingers together. This step serves to hide all the loose ends of the stretch beading string so you don't have those ends hanging out and looking gross.

 
5.) I then used the thicker ribbon to wrap the outer ring. I used more technique for this one as it will be more easily viewed.

6.) I then tied 4 20" pieces of stretch beading string to each junction of the inner crossbar and the outer ring by which I could hang the mobile. In doing this, I ended up with loose ends again so I used a cool 4-point wrap technique to hide the ends and also add some decorative flair to these junction points. And I used lots of jewelry and metal glue!

7.) After all that, you just have to gather your 4 hanging strings and be very careful about making sure they're all level so your mobile isn't hanging all weird and crooked. Unless, of course, you want it that way. :) Hang it, and you have a perfectly beautiful (and cheap) trendy baby mobile with the die cuts of your choice!

I will admit that I had a lot of these supplies to begin with, but the beauty of this project is that you can really make it with whatever you have on hand. I ended up making it myself for less than $15. It's much more personal, fitting her room perfectly, and I got to choose the colors and shapes I wanted. I also wanted those clouds in there, and I couldn't find any that were just the way I wanted. Again, I'm picky like that. Know any babies coming your way? This would be a really fun and very personal shower gift for that new little bundle. Happy Crafting!

El Cheapo Artwork a la Rayna

As we are nearing the arrival of our second baby, we're trying our best to get her room ready and prepared just the way we want it. I'm not going to say I'm picky, I just have an idea of what I want, and that's usually what I want. I don't like to compromise a whole lot on that front if I don't have to. Artwork for her room has been a bit of a challenge in that regard so I decided to take it into my own hands. Enter: Rayna's Craft Tutorial #2.

El Cheapo Artwork a la Rayna

Supplies:
plywood backing for the corresponding paper size (3/8" thickness at least)
brayer
decoupage glue
foam brushes
cutting mat
artwork hanging hardware (I used the sawtooth hangers)
craft knife
pencil
hammer
desired scrapbook papers for artwork

1.) Make sure your plywood backing is the same size as the paper you're going to work with. If it isn't, cut the plywood backing to size. Note: I bought my plywood backing at Michael's where I was able to use a 40% off coupon and get 12" x 12" for the same size as my scrapbooking paper.

2.) If you wish, you can turn your paper right side down and lay the plywood backing on top of it so you can trace the outline of where you want it glued. I just kind of winged it, which also worked.

3.) Brush on a generous amount of glue onto the side of the plywood backing where you'll be gluing your scrapbook paper. This is the point at which you have to work pretty quickly...

4.) Lay your scrapbook paper on top of your gluey plywood board, get it in position as QUICKLY as possible, and then use the brayer to flatten it out and get out any air bubbles that may have appeared when you laid it down. Again, WORKING QUICKLY.

5.) When you're happy with the appearance of your artwork at this point (this is pretty much how it will look when you're done so keep that in mind), you can flip over the entire piece of artwork and lay it right side down on top of your cutting mat. If necessary, use your craft knife to trim the paper so it's flush with the sides of the plywood board.

6.) At this point, I ran my fingers around all 4 corners smoothing down cuts and wiping away excess glue. Then, I attached my hardware. I recommend getting a plywood board with at least a 3/8" thickness because that allows the nails to be pounded in without going through your artwork in the front. That would be bad. You can also get this kind of hardware (and several other different kinds of hanging hardware) at Michael's and use a coupon!

7.) Turn your artwork back around so the right side is facing upward, and, if desired, brush on another generous layer of the decoupage glue to kind of set and seal the paper artwork. It also adds a really cool vintage patina so it looks like you've had it forever. :) Make sure you get the glue around the edges of the paper so it won't start to peel up in the future. Also make sure to remove any excess glue.

Voila! Now you are done and can hang your lovely artwork anywhere in your house. People will wonder where you bought that beautiful piece!

I did two of them for our baby room and completely beat the price of anything we saw in the stores. We had seen some beautiful artwork at Target, but we didn't really want to pay $15 each for a set of 3.
This is what we did instead:
*plywood backing $2.50 (with coupon) (x2)
*scrapbooking paper $0.69 (x2)
*2 foam brushes  $1.99

And I already had everything else so I spent $8.37 for 2 very personalized pieces of artwork. I'm so proud of myself. So head on over to your local craft/scrapbooking store and go nuts. Happy Crafting!