Make Your Own Rubber Stamp!

This is a really fun and easy project (depending on your stamp design, I suppose) that will set apart your crafts from everybody else's. Seriously... who else will have this stamp?!

Customizing Your Own Stamp

materials
*image to transfer (make sure it's flipped horizontally so it will be the right way when you stamp it)
*linocut or a large eraser (whatever fits your image; Michael's sells linocut!)
*rubber cement
*cutting tools

steps
1. Use the rubber cement to adhere your image to the linocut block. Please make sure your image is flipped horizontally! I made this mistake the first time I did it, and wanted to kick myself when I went to check the proof. :) Argghhh!

2. Know which part of the image you want to be the stamp. I wanted Ohio to be the stamp so I would cut all the linocut away except the state of Ohio. Use your sharpest tool to cut around the image's outline so you can start cutting away the larger portions of what you don't want.

NOTE: If you wanted the stamp to be the outline around the state of Ohio, you would cut away the state itself.

I also wanted the heart to be an outline so I took a finer tool and then traced around the outline of the heart. I then used a small, curved tool to cut out the inside of the heart at an angle so I didn't weaken my state outline.

3. Now it's time to check your proof! Stamp your image to make sure you have all the necessary linocut cut away to get a nice, crisp image. Cut more if you need to.

And now you have a totally unique, one-of-a-kind rubber stamp. Just another thing that makes you awesome. ;) If you wanted, you could mount your linocut stamp onto a wooden block. Our local arts store sells wooden blocks so you might have to do a little looking. I haven't seen those at Michael's, yet. Or you could make your own! I just ran a couple lines of removable adhesive down the back of my stamp so I can use it on any of my acrylic stamping blocks. Whatever you do, have fun with it!

I Have a New Work Table!

Yes! I have a brand new work table made by none other than my wonderful husband. He made it for me for my birthday, and it's finally been installed! It folds up against the wall for storage. Lucky for him, though, I don't EVER intend on folding it away. There will undoubtedly always be SOMETHING on it. :)

Here we have my lovely model, Joey showing off its wonderful table-ness. It holds things, like tupperware bowls, on its surface wonderfully. It is also a good place at which to sit. Scott painted it my favorite color (purple!), and, my personal favorite detail, added decorative exposed screw heads. Beautiful!

And here we have me in my usual crafting position. That is to say crouched over just asking for back pain but enjoying myself immensely! So here's to a wonderful husband who is incredibly talented in the work shop. In making me this wonderful crafting table, he has unknowingly added some more items to his work list. :) Happy Crafting... and Happy Birthday to me!

DIY: Trendy Baby Decor

I'm going to apologize for this "tutorial" right now. Yes, I'm implying it's not really a tutorial. It's more like half of one. I wasn't entirely sure this was going to work out when I started it, but, as it turns out, I really liked the end result.

I think we've all seen those beautiful chandelier butterfly mobiles that are pretty popular right now. They're all over etsy, pottery barn has one and you can find them on amazon. The only problem with these is 1) they're usually between $50 and $80 and 2) butterflies are really your only decorative option. Enter... the brain trust...

Trendy Chandelier Mobiles: a la Rayna

Supplies:
colored papers for die cutting
die cutting method (cricut, punch, freestyle with scissors, etc.)
ruler
metal ring (I used 10" diameter)
.5mm stretch magic beading string
18 gauge wire
wire cutters / curlers
coordinating ribbon for wrapping exposed metal wire and ring
* I used 1/4" for the smaller inside wire
* I used 3/8" for the larger outer ring
scissors
various adhesives
*I used glue dots for adhere birds to stretch string
*I used scotch tape to wrap loose ends of stretch string around exposed wire and ring
*I used Aleene's Jewelry & Metal Glue for adhering wire to ring and ribbon to wire / ring
various clamps for holding wrapped ribbon when your hands start to cramp

I first had to strategize how I was going to lay out my mobile. This probably took the longest amount of time for me as it was a LOT of trial and error. I designed it as an outer metal ring with a 4-point inner crossbar. In the end, I ended up with these specs where the red dots represent where I tied each chandelier string:

• 1 middle string: 24" long
• 4 strings radiating out at 21" long
• 4 strings radiating out at 15" long
• 16 strings along outer ring at 12" long

With the spacing I chose and the die cut sizes (birds: 2", clouds: 2-1/2"), the individual string specs worked out like this:

• 24" string: 6 die cuts (2 clouds, 4 birds)
• 21" strings: 4 die cuts (1 cloud, 3 birds)
• 15" strings: 3 die cuts (1 cloud, 2 birds)
• 12" strings: 2 die cut birds 

Phew. Now that that's over... 

1.) I first made my inner crossbar with the 18 gauge wire and adhering it to itself with  the jewelry and metal glue. Be careful with this stuff. I almost bonded my fingers together about a million times. But it works some serious magic with the wire and the ribbon. I wrapped the outer ends of the crossbar around the outer ring with the wire curlers and also used the glue to adhere these 4 points in place.

2.) Using the specs listed above, I then attached all the die cuts to the chandelier strings and then attached the chandelier strings to the crossbar and outer ring with the stretch beading string.

3.) I used the scotch tape to wrap all the stretch beading string loose ends from the chandelier strings around the inner crossbar wires and outer ring.

4.) After all the loose ends are taken care of, wrap the inner crossbar wire with the thinner wire. I fastened the ends of the ribbon to the wire with the jewelry & metal glue. Pure magic. Just don't glue your fingers together. This step serves to hide all the loose ends of the stretch beading string so you don't have those ends hanging out and looking gross.

 
5.) I then used the thicker ribbon to wrap the outer ring. I used more technique for this one as it will be more easily viewed.

6.) I then tied 4 20" pieces of stretch beading string to each junction of the inner crossbar and the outer ring by which I could hang the mobile. In doing this, I ended up with loose ends again so I used a cool 4-point wrap technique to hide the ends and also add some decorative flair to these junction points. And I used lots of jewelry and metal glue!

7.) After all that, you just have to gather your 4 hanging strings and be very careful about making sure they're all level so your mobile isn't hanging all weird and crooked. Unless, of course, you want it that way. :) Hang it, and you have a perfectly beautiful (and cheap) trendy baby mobile with the die cuts of your choice!

I will admit that I had a lot of these supplies to begin with, but the beauty of this project is that you can really make it with whatever you have on hand. I ended up making it myself for less than $15. It's much more personal, fitting her room perfectly, and I got to choose the colors and shapes I wanted. I also wanted those clouds in there, and I couldn't find any that were just the way I wanted. Again, I'm picky like that. Know any babies coming your way? This would be a really fun and very personal shower gift for that new little bundle. Happy Crafting!

El Cheapo Artwork a la Rayna

As we are nearing the arrival of our second baby, we're trying our best to get her room ready and prepared just the way we want it. I'm not going to say I'm picky, I just have an idea of what I want, and that's usually what I want. I don't like to compromise a whole lot on that front if I don't have to. Artwork for her room has been a bit of a challenge in that regard so I decided to take it into my own hands. Enter: Rayna's Craft Tutorial #2.

El Cheapo Artwork a la Rayna

Supplies:
plywood backing for the corresponding paper size (3/8" thickness at least)
brayer
decoupage glue
foam brushes
cutting mat
artwork hanging hardware (I used the sawtooth hangers)
craft knife
pencil
hammer
desired scrapbook papers for artwork

1.) Make sure your plywood backing is the same size as the paper you're going to work with. If it isn't, cut the plywood backing to size. Note: I bought my plywood backing at Michael's where I was able to use a 40% off coupon and get 12" x 12" for the same size as my scrapbooking paper.

2.) If you wish, you can turn your paper right side down and lay the plywood backing on top of it so you can trace the outline of where you want it glued. I just kind of winged it, which also worked.

3.) Brush on a generous amount of glue onto the side of the plywood backing where you'll be gluing your scrapbook paper. This is the point at which you have to work pretty quickly...

4.) Lay your scrapbook paper on top of your gluey plywood board, get it in position as QUICKLY as possible, and then use the brayer to flatten it out and get out any air bubbles that may have appeared when you laid it down. Again, WORKING QUICKLY.

5.) When you're happy with the appearance of your artwork at this point (this is pretty much how it will look when you're done so keep that in mind), you can flip over the entire piece of artwork and lay it right side down on top of your cutting mat. If necessary, use your craft knife to trim the paper so it's flush with the sides of the plywood board.

6.) At this point, I ran my fingers around all 4 corners smoothing down cuts and wiping away excess glue. Then, I attached my hardware. I recommend getting a plywood board with at least a 3/8" thickness because that allows the nails to be pounded in without going through your artwork in the front. That would be bad. You can also get this kind of hardware (and several other different kinds of hanging hardware) at Michael's and use a coupon!

7.) Turn your artwork back around so the right side is facing upward, and, if desired, brush on another generous layer of the decoupage glue to kind of set and seal the paper artwork. It also adds a really cool vintage patina so it looks like you've had it forever. :) Make sure you get the glue around the edges of the paper so it won't start to peel up in the future. Also make sure to remove any excess glue.

Voila! Now you are done and can hang your lovely artwork anywhere in your house. People will wonder where you bought that beautiful piece!

I did two of them for our baby room and completely beat the price of anything we saw in the stores. We had seen some beautiful artwork at Target, but we didn't really want to pay $15 each for a set of 3.
This is what we did instead:
*plywood backing $2.50 (with coupon) (x2)
*scrapbooking paper $0.69 (x2)
*2 foam brushes  $1.99

And I already had everything else so I spent $8.37 for 2 very personalized pieces of artwork. I'm so proud of myself. So head on over to your local craft/scrapbooking store and go nuts. Happy Crafting!